 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Sub-Miniature Automotive PCB Relay Sub-Miniature Automotive PCB Relay General purpose automotive PCB relay. High capacity relay. High heat resistance. G8SE Available Types Type G8SE--1A4--L 12DC (320!) Contact form SPST Recommended loads Motor, Resistive Contact Data Continuous carry current (max.) Inrush current (L/R=7ms; 15ms max.) Contact value drop (Initial value) 20A 60A 50m! Ratings/Specifications Rated voltage Operating voltage (max.) Coil resistance Pull in voltage (cold start) at +20"C (max.) Drop-out voltage at +20"C (min.) Max. Continuous carry current flow time (16 VDC at 80"C max.) Operating time (max.) Release time (max.) Operating ambient temperature Mechanical life (min.) Electrical life (resistive load) (max.) Weight 12 VDC 16 VDC 320 ! 7.3 VDC 1.2 VDC Unlimited 10 ms 5 ms --40"C to +110"C 1,000,000 cycles (at frequency of 18,000 operations/hour) 100,000 cycles 16.0g G8SE G8SE Application Examples # # # # # # Electric wing mirror Car audio Power radio aerial Air--conditioning Courtesy lamp Power window # # # # # Electric sunroof Intermittent windshield wiper Passive restraint seatbelt Power door lock Power seat Dimensions (All dimensions in mm) TYPE COIL RESISTANCE RATED VOLTAGE MANUFACTURED COUNTRY MARK mark LOT NO. 1.8 22.5 max. 21.6 typ. 16.5 max. 15.6 typ. 1.45 4.85 10 5.3 2 x 1.4 dia. mounting holes 4 x 1.3 dia. mounting holes 1.8 6 12 16.5 max. 16.2 typ. 1.0 mark 3.0 min. 1.0 0.32 0.4 2.5 1.0 1.2 1 2 3 6 5 4 3.5 4.5 Omron PCB relays may be mounted in any convenient location that is dry and not exposed to excessive dust, S02, H2S or organic gases. All Omron PCB relays may be oriented in any desired direction. Whenever possible, however, care should be taken that they are not subjected to vibration along the direction of contact movement. If several relays are to be mounted on a single printed circuit board, they should be given at least 3mm clearance on all sides as shown in the diagram below. 3mm min. 3mm min. Note: Proper spacing is necessary to dissipate heat build--up from individual relays. Other than this, there are normally no restrictions depending on application. Please contact Omron for details. Cat. No. K905--E2--01 In the interest of product improvement, specifications are subject to change without notice. OMRON Electronics Ltd. LEADERS IN ELECTRONIC COMPONENTS 1, Apsley Way, Staples Corner, London NW2 7HF Phone: (0181) 450 4646 Fax: (0181) 450 8087 |
Price & Availability of G8SE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |